- #Sony firmware update mac bdp s500 v.6 install
- #Sony firmware update mac bdp s500 v.6 upgrade
- #Sony firmware update mac bdp s500 v.6 software
- #Sony firmware update mac bdp s500 v.6 download
#Sony firmware update mac bdp s500 v.6 software
The software update starts and the progress screen is displayed on the television.The Blu-ray Disc player will restart itself when it is complete and the second portion of the update will start.During the update the message */9 is displayed on the television Note: The * changes to 0 through 9, indicating the update progress.The first portion of the update process starts and the progress screen is displayed on the television.Select OK and then press the ENTER button.Perform version update? message is displayed.At the xrossmediabar (XMB), use the arrow keys on the remote control to select Setup - Network Update and then press the ENTER button.If there is a disc in the Blu-ray Disc player, please remove the disc.Connect the LAN(100) terminal on the Blu-ray Disc player to your Internet source using an Ethernet cable.Power on the television and make sure it is tuned to the inputs to which the BD player is connected.
Note: The firmware upgrade process usually takes about 15 to 30 minutes, depending on system configuration and network connection In order to perform the firmware upgrade, it is necessary to have the system correctly connected to a compatible television.In order to use this update method it is necessary to have the player correctly connected to an active Internet connection.WARNING!! Do not power off the Blu-ray Disc player or disconnect it from the AC power outletLoss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair.WARNING!! Please follow the update instructions carefullyFailure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair.The Network Update operation is straightforward, so it is highly recommended that you use the Network Update method to update the BDP-S190/S390 firmware
#Sony firmware update mac bdp s500 v.6 download
#Sony firmware update mac bdp s500 v.6 install
Use the arrow keys to select System Information, and then press the ENTER button.Use the arrow keys to select Quick Start Mode and make sure that the Quick Start Mode is set to Off If the Quick Start Mode is set to On, change the setting to OffOtherwise, the firmware update may not succeed.Use the arrow keys on the remote control to select Setup – System Settings, and then press the ENTER button.If the player starts to play a disc, press the STOP button and wait until the xross media bar™ menu is displayed on the television before proceeding.Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.Recommended Operating System for the computer to create an upgrade disc: This utility updates BDP-S190/S390 firmware to version M11.R.0502 and provides the following benefits: This utility is only for use with the products identified and sold in Asia PacificNot all models are sold in all countries